ProMariner Galvanic Isolator with UL Certification, FS60 Boat Isolator, FailSafe Technology for Protection Against Corrosion and Zinc Loss

Fail-safe technology with worry-free reliability. The ProSafe FS Series FailSafe 30 and 60 amp galvanic isolators interrupt the flow of galvanic current to other boats in a marina when installed on a boat connected to AC shore power. This technology maintains AC safety grounding and solves the most common forms of corrosion and premature zinc loss in a boat's interconnection system. The ProSafe FS Series is UL-certified and meets the parameters of the ABYC A-28 recommendation. ProSafe FS is easy to install and does not require a dedicated monitor to verify the galvanic isolator's operating status, as is required with non-FailSafe-certified galvanic isolators. Both the ProSafe 30 and 60 amp models are based on rugged flat-pack semiconductor platforms, ensuring that in the event of a failure

• ABYC A-28 July 2008 Compliance and Resilience Certified: Certified by Underwriters Laboratories (UL). Ensures that the safety ground wire for shore power is maintained through the isolator.
• Flat-pack high-power semiconductors: Robust high-performance diodes enable the FS series to meet the new fail-safe criteria for conducting inrush currents of 3,000 and 5,000 amperes (FS30 and FS60, respectively) for the required duration.
• Innovative design: The FS60 cools itself if it needs to conduct power to ensure cooler operation in this mode
• Ignition-protected: Complies with ISO 8846 and each model can be mounted in the engine compartment
• Gold-plated connectors: Simply install your green safety ground wire on board (between your AC input and your AC panel) to separate your DC bonding system from your green Shore AC cable
• Use the ProSafe FS30 for 30 Amp Shore cable applications
• Use the ProSafe FS60 for (1) 50 A or (2) 30 A Shore cable applications