awn Antifouling Remover gel-like formula, antifouling remover, gentle on gelcoat and primer

It's a very effective antifouling remover. Within a very short time, the antifouling layers are dissolved so thoroughly that they can be easily removed with a spatula. The material has a gel-like consistency, allowing it to remain in place for extended periods, even on vertical surfaces, without running. It does not attack the gelcoat or two-component primers in the substrate.

Apply awn Antifouling Remover in an even layer to the surface to be treated. After a contact time of approximately 60 minutes, scrape off the loosened layers with a spatula. Repeat this process until all layers of paint have been removed. Collect the paint residue and dispose of it properly. Be sure to protect adjacent surfaces from contamination or exposure. For safety reasons, wear protective gloves and goggles.

• Carefully open the container
• Apply the material directly and generously to the surface using a brush
• Exposure time approx. 1 hour - maximum 2 hours
• After the exposure time, remove loosened paint layers
• Then clean the surface thoroughly with water and let it dry
• Consumption: depending on the thickness of the antifouling layer approx. 200-600 ml/m
• Store frost-free and not above + 40°C!