Johnson impeller for bilge/bilge pump ( 09-810 B-9 )
Our payment methods:
Paid in advance
Product number:
220379
Weight:
0.01 kg
Impeller for your bilge / bilge pump from Johnson. Made of nitrile, as it is chemically more robust than neoprene, but offers about 10 percent lower flow rate.
Our safety tip:
Check your bilge pump and also your cooling water pump once a year and change the impeller. It is the most important component of your pump. In addition, we recommend that you always have a spare impeller on board for safety'
| Application area: | Bilge pump |
|---|---|
| Identical in construction with JABSCO-No.: | 18653-0003 |
| Identical in construction with JOHNSON-No.: | 09-810 B-9 |
| Internal diameter: | 12 mm |
| Outer-Ø: | 50.8 mm |
| basic material: | nitrile |
| type: | 09-810 B-9 |
| width: | 22 mm |
You may also like these products
-10%
Extractor tool for impeller up to 65 mm diameter
€119.99*
€133.70*
(10.25% saved)
With this stainless steel tool, all water pump impellers can be easily pulled out of the pump without damaging the pump housing. Generously sized handle to loosen even stuck impellers with a diameter of up to 65 mm.
-4%
Puller tool for impeller with diameter from 65 - 118 mm
€149.99*
€155.90*
(3.79% saved)
Stainless steel tool to easily pull out all water pump impellers from 65 to 118 mm diameter without damaging the pump housing. Generously sized handle to loosen even stuck impellers.